Select every interface your board needs.

Choose more than one signal on either side. After selecting an interface, set whether you need one or two independent channels. The selector then checks the current XILUME controller family.

1Select interfaces2Set quantities3Review the match

INPUT

Host-side interfaces

Multiple selections allowed

CHANNELS

HOST SIDE

No interface selected

XILUME INTERFACE CONTROLLER

FIELD SIDE

No interface selected

OUTPUT

Field-side interfaces

Multiple selections allowed

CHANNELS

GROUPS

WAITING FOR SELECTION

RECOMMENDED XILUME CONTROLLER

Select interfaces

Choose at least one host-side interface and one field-side interface to begin matching.

CONFIGURATION HOST — / FIELD —

Host interfaces: Not selected
Field interfaces: Not selected
Memory class: —
Package class: —
Logic supply: —
Product profile: —

View product information

Models and values marked Engineering remain provisional until the corresponding release-controlled datasheet is published.

AFTER A CONTROLLER IS MATCHED

The exact model carries its own controlled file set.

The selector is intended to lead directly from an interface requirement to the files required for schematic integration.

01Datasheet

Electrical limits, power, package, and supported functions.

02Fixed pinout

Pin number, direction, voltage domain, reset state, and connection.

03Reference schematic

Controller, transceiver, USB, protection, and recommended support circuits.

04Host protocol

Commands, frames, responses, errors, timeouts, and configuration behavior.

05Software tools

Windows and Linux test tools, examples, and verification procedure.

06Revision record

Product revision, validation status, changes, and known limitations.